Skip to main content

Guide to Dial-in Racing

In most professional forms of drag racing, the first one across the finish line wins. However, in bracket racing, that isn't always how it works out.

The two brackets of which dial-in racing mainly apply: are Super Street (11.00 to 12.999 seconds), and Street (13.00+ seconds). Since each of these categories contains a wide range of E.T.'s, you are handicapped based on a time that you predict you will run. This is called your "dial in". The person who runs closest to their dial-in without going faster wins the race. If you go faster than your dial-in, you "break out" and automatically lose the race.

For example, if your Nissan Pulsar runs a consistent 15.10 and the Commodore you are racing dials in at 12.70, you would get a 2.40 second head start. If you both got to the finish line at exactly your dial-in, the race is a tie. In practice, this never happens due to differences in reaction times and vehicle performance.

The staging lights also measure how long it takes you to leave your staged position. This is called your reaction time. In bracket racing it is very important as you must be consistent in your launch (via reaction time) and your vehicle must be consistent in the quarter mile (via dial-in). Your reaction time is usually expressed as a number indicating how long you leave after the last amber light comes on. A perfect time would be .400, which is exactly when the green light comes on. If you get under .400, you "red light" and lose the race. If you take longer than .400, you will take longer to get to the finish line, which can cost you the race.

There are also different ways to "stage" in bracket racing. All strips use the standard "Stage" and "Pre Stage" lights on top of the "christmas tree" lights. These lights are tied to two light beams that go across the track, one immediately after the other. When your wheel breaks the first beam, you are "pre-staged". This lets you know that you are getting close to the starting line. As soon as you inch forward to the second beam, you light the "stage" lights. As soon as both lights are lit on both sides of the track, the starter will begin the race.

The key to winning the race is a low reaction time and a consistent performance by your vehicle. If you run faster than your dial-in, you automatically lose, so if you feel you are running too fast, you might want to slow down just as you are approaching the finish line so that you don't go over your dial-in.

Eliminate variables between runs. You can do this by keeping your vehicle in the same configuration, completing your burnout and staging the same way, shifting at the same points, and being consistent as possible to win a bracket race. Compensate for changing track conditions by using your dial-in (you can change it after each race). Also remember that slower cars are often more consistent, so you don't need to try to wring every last HP out of your car to win a bracket race. Remember, the first over the line doesn't always win in dial in racing!

Have fun.